| Machine won't spray. Loss of water pressure |
 |
 |
Make sure there is cleaning solution in the lower tank. If dirty water stops entering the upper tank, the lower tank is empty. Empty soiled water from upper tank and refill lower tank with fresh solution. |
|
|
Make sure small solution hose is
still connected at rear of machine (upholstery only). |
|
| Improper suction or loss of vacuum power |
|
|
Make sure the plastic dome is properly sealed to the upper tank. |
|
|
Make sure the filter inside the clear plastic dome is clean. |
|
|
Check the large hose connection on the rear of the machine. |
|
| No power or loss of power |
|
|
Make sure the machine is switched on. |
|
|
Make sure the cord is plugged in and the power switch on top of the machine is on. |
|
|
If power is still not restored,
push the reset button. The reset button is on the top
of the machine. |
|
|
Check your home's circuit breakers or fuse box. |
|
|
Check with another appliance in
same power point. |
|
| Excess foaming |
|
|
Check product instruction
label for mixture volume. |
|
| Still having difficulties? |
|
|
If problems
persist, please call our Consumer Support Specialists
at 0800 800 245, 7 days from 8 am to 9 pm. |
